Improved Noise Immunity
The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity.
This is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Radio Design
Ubiquiti’s InnerFeed™ technology integrates the radio into the feedhornbof an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely
versatile and cost‑effective to deploy.
Innovative Mechanical Design
The integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.
Superior RF Isolation
Compare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.
Advanced Software Technology
Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Product specifications |
Dimensions |
364 x 364 x 276 mm (14.33 x 14.33 x 10.87") |
Weight |
2.55 kg (5.62 lb) |
Power Supply |
24V, 0.5A PoE |
Power Method |
Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Supported Voltage Range |
20-26VDC |
Max. Power Consumption |
6W |
Gain |
22 dBi |
Operating FrequencyWorldwide
USA |
5170 - 5875 MHz5725 - 5850 MHz |
Wind Loading |
210 N @ 200 km/h (47 lbf @ 125 mph) |
Wind Survivability |
200 km/h (125 mph) |
LEDs |
(1) Power, (1) LAN, (4) WLAN |
Signal Strength LEDs |
Software-Adjustable to Correspond to Custom RSSI Levels |
Channel Sizes |
5/8/10/20/30/40 MHz |
Polarization |
Dual Linear |
Enclosure |
Outdoor UV Stabilized Plastic |
Mounting |
Pole-Mount Kit Included |
ESD/EMP Protection |
Air: ± 24 kV, Contact: ± 24 kV |
Operating Temperature |
-40 to 70° C (-40 to 158° F) |
Operating Humidity |
5 to 95% Non-Condensing |
Salt Fog Test |
IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration Test |
IEC 68-2-6 |
Temperature Shock Test |
IEC 68-2-14 |
UV Test |
IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
Wind-Driven Rain Test |
ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |