The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
A single, compact controller efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
The ruggedized case withstands outdoor conditions, including wind, rain, and snow. The included cable sleeve protects the cables and cable opening. If you prefer, you can swap it out for your own conduit.
For the EP-R6, powerful routing features such as load balancing and failover provide redundancy and increased performance for outdoor wireless links.
Powered by 24VDC or by PoE, the EP-R6 can support 24V passive PoE to power most Ubiquiti products.
TheEP-R6 features
- VLAN interfaces for network segmentation
- Static routes and support of routing protocols: OSPF, RIP, and BGP
- Firewall policies and NAT rules
- Application identification with Deep Packet Inspection (DPI)
- DHCP services
- Quality of Service (QoS)
- Network administration and monitoring tools
- Administrator and operator accounts
- Comprehensive IPv6 support
| Product Specifications | |
|---|---|
| Dimensions | 188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96") |
| Weight | 605 g (1.33 lb) |
| Max. Power Consumption | 7W (Excludes PoE Output) |
| Power Input | (1) DC Terminal Block or (1) RJ45 (eth0) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs) |
| Power Supply | Min. 24V / 0.3A (Excludes PoE Output Power) |
| VDC Input | 24V, 3A |
| Passive PoE Input | (1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 (Do NOT Configure eth0 in PoE Output Mode if You Are Using a PoE Input Power Source.) |
| Passive PoE Output | (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4 |
| Power Monitoring | (1) DC Terminal Block, Input Power (1) RJ45, eth0, Input Power |
| Supported Voltage Range | 26 to 16VDC |
| Button | Reset |
| LEDs: | |
| System | Power |
| eth0 to eth4 | Speed/Link/Activity, PoE |
| eth5/SFP | Speed/Link/Activity |
| Ports: | |
| Data Ports | (5) 10/100/1000 RJ45 Ports (1) 1 Gbps SFP Port |
| Processor | Dual-Core 880 MHz, MIPS1004Kc |
| System Memory | 256 MB DDR3-1600 RAM |
| Code Storage | 256 MB NAND |
| Certifications | CE, FCC, IC |
| Pole Mount | Yes |
| Operating Temperature | -20 to 65° C (-4 to 149° F) |
| Operating Humidity | 10 to 90% Noncondensing |
